How to Hand Embroider

Difficulty: Beginner  |  Time needed: About 1 hour to learn the stitches  |  Last updated: November 17, 2026

Introduction

Embroidery can look like a craft reserved for experts, with its detailed flowers, lettering, and textured designs. The truth is that most beautiful embroidery is built from just a few simple stitches, and you can learn the three most useful ones in a single sitting.

By the end of this tutorial, you'll know how to set up your hoop, thread your needle, and stitch with the running stitch, backstitch, and satin stitch. Together, these three let you create lines, outlines, lettering, and solid filled shapes.

Once you master these, you can embroider on tea towels, tote bags, clothing, and framed art, all with a few supplies and some thread.

Before You Begin

You'll need:

  • Fabric: a tightly woven, medium-weight fabric such as cotton, linen, or quilting cotton. Avoid stretchy or very thin fabrics for your first project. Cut it at least 2 inches larger than your hoop on every side.
  • Embroidery hoop: a 5 to 7 inch hoop is a good size for beginners. It holds the fabric taut while you stitch.
  • Embroidery floss: six-strand cotton floss in two or three colors. You'll usually stitch with 2 or 3 strands at a time.
  • Embroidery needle: a sharp needle with a long, large eye. A size 5 to 7 works well for 2 or 3 strands of floss.
  • Water-soluble fabric pen or a sharp pencil: for tracing your design onto the fabric.
  • A simple design: a printed pattern, or a small shape like a leaf, heart, or flower that you draw yourself.
  • Small, sharp scissors: for trimming thread tails.

Good to have (optional):

  • A light box or sunny window to help you trace your design
  • A needle minder or pincushion to keep your needle safe
  • An iron and a clean towel for pressing your finished piece
  • Floss bobbins or organizer cards to keep your colors sorted

Step-by-Step Instructions

1. Transfer your design to the fabric

Place your pattern under the fabric and tape both to a window or light box. Trace the design onto the fabric with a water-soluble pen or a sharp pencil, using light lines. For your first project, choose a simple shape like a leaf with a stem, which lets you practice all three stitches.

Tracing a leaf design onto fabric with a water-soluble pen against a window
Tip: Keep your lines thin and faint. Your stitches will cover them, and thinner lines are easier to remove afterward.

2. Place your fabric in the hoop

Loosen the hoop's screw and separate the inner and outer rings. Lay the inner ring under your fabric with the design centered, then press the outer ring down over the top. Tighten the screw and gently pull the edges of the fabric until it's taut like a drum, but not stretched out of shape.

Fabric stretched tightly in an embroidery hoop with the traced design centered

3. Cut and separate your floss

Cut a length of floss about 18 inches long. Longer pieces tend to tangle and fray. Embroidery floss comes with six strands twisted together, so gently pull out one strand at a time, then combine the number you need. Use 2 strands for fine lines and lettering or 3 strands for a fuller look.

4. Thread the needle and make a starting knot

Thread the floss through the needle's eye and pull the ends so one side is about 3 inches long. Tie a small knot at the end of the long side. Then bring the needle up from the back of the fabric at your starting point, so the knot sits on the back.

Heads up: Make your knot small and snug. Large knots can create bumps that show through the fabric on the front.

5. Stitch #1: the running stitch

The running stitch is the simplest stitch and is perfect for dashed lines and gentle outlines. Bring the needle up at point A, then push it down a short distance away at point B (about 1/8 inch). Bring it back up at point C, one gap length beyond B, and push it down again at point D. Repeat along your line, keeping the stitches and gaps roughly equal.

Diagram of a running stitch with evenly spaced short stitches and gaps
Tip: For a neater look, pull each stitch snug against the fabric without making it pucker.

6. Stitch #2: the backstitch

The backstitch makes a solid, unbroken line, which makes it ideal for outlines and lettering. Starting at the beginning of your line (point 1), bring the needle up at point 2, one stitch length ahead. Push the needle down at point 1 to make your first stitch. Then bring the needle up at point 3, one stitch length beyond point 2, and push it down at point 2. Repeat, with each new stitch going backward to meet the end of the last one.

Diagram of the backstitch showing each stitch meeting the end of the previous one

7. Stitch #3: the satin stitch

The satin stitch fills shapes with smooth, solid color. Bring the needle up at one edge of the shape, then push it down directly across at the opposite edge. Bring it back up right beside your first stitch and repeat, laying each stitch next to the last so they sit parallel with no gaps. Continue until the shape is filled.

A leaf shape filled with parallel satin stitches
Tip: Outline the shape with a backstitch first, then stitch over it with your satin stitches for crisp, clean edges. For larger shapes, keep stitches under about 1/2 inch long, since longer ones can snag.

8. Finish off your thread

When your thread gets short (about 3 inches), or you've finished a section, bring the needle to the back of the fabric. Slide it under 4 to 6 stitches on the back, then trim the tail close to the fabric. Use the same method to secure each new thread you start.

Back of embroidery with thread tail woven under several stitches

9. Put it all together and finish your piece

Try combining all three stitches in one design. For example, stitch a leaf using the backstitch for the outline, satin stitch for the filling, and running stitch for the veins or stem. When you're finished, remove the fabric from the hoop. Dab or rinse away any pen marks according to the pen's instructions, let the piece dry, then press it face down on a clean towel with a warm iron.

Troubleshooting

Problem Likely cause Fix
Fabric puckers around the stitches Pulling the thread too tight Pull until the stitch lies flat, then stop. Make sure the hoop is taut.
Stitches look loose or loopy Not enough tension, or fabric is slack in the hoop Re-tighten the hoop and pull each stitch gently snug.
Satin stitch has gaps or jagged edges Stitches not laid side by side, or uneven edges Outline the shape with a backstitch first, then pack each stitch right beside the last.
Thread twists and knots Thread has built up twist, or the length is too long Let the needle dangle and spin to unwind, and use shorter lengths (about 18 inches).
Fabric shows through the stitches Too few strands of floss Add a strand of floss, or stitch your lines a bit closer together.
Needle is hard to pull through the fabric Needle is too small for the thread, or the fabric is too dense Try a larger needle, or use fewer strands of floss.

Still stuck? Visit our shop or reach out, and we'll help you get unstuck.

Conclusion

You've learned the running stitch, backstitch, and satin stitch, which together can create lines, outlines, lettering, and filled shapes. With practice, your stitches will become more even and your designs more confident with every project.

From personalized gifts and decorated clothing to framed hoop art, you now have the skills to turn plain fabric into something handmade.